峰溢下载站:专为(Android)安卓手机用户量身打造的安卓游戏、APK游戏下载平台!
网站地图
你的位置: 首页 > 游戏资讯 > 操作系统

Linux 监控CPU 温度

  • 2023-08-19 05:10:29
  • 来源:未知
  • 在手机上看

    扫一扫立即进入手机端

  安装测试系统:

  硬件:普通PC机,

  软件:redhat linux as 4 2.6 .9 , 安装系统自带的lm_sensors-2.8.7-2.i386

  你也可以从[url]http://www.edgedesign.us/about/lm_sensors[/url]下载

  这个软件可以在linux下收集到系统温度。然后我用cacti显示。

  由于是系统自带的。所以我在安装系统的时候就已经安装好的。所以如果你找不到的话。可以在系统盘上找,然后rpm安装。这个我就不说了。

  下来看配置:

  运行: /sbin/depmod –a

  vi /etc/ld.so.conf

  加入这一行: /usr/local/lib

  运行: ldconfig

  运行:sensors-detect 扫瞄你的主机使用那些芯片组

  1: We can start with probing for (PCI) I2C or SMBus adapters.

  You do not need any special privileges for this.

  Do you want to probe now? (YES/no): YES

  2:Next adapter: SMBus I801 adapter at 0500 (Algorithm unavailable)

  Do you want to scan it? (YES/no/selectively): YES

  3:Do you want to scan the ISA bus? (YES/no): YES

  4:Do you want to scan for Super I/O sensors? (YES/no): YES

  5:Do you want to scan for secondary Super I/O sensors? (YES/no): YES

  6:Now follows a summary of the probes I have just done.

  Just press ENTER to continue: 回车

  7:I will now generate the commands needed to load the I2C modules.

  Sometimes, a chip is available both through the ISA bus and an I2C bus.

  ISA bus access is faster, but you need to load an additional driver module

  for it. If you have the choice, do you want to use the ISA bus or the

  I2C/SMBus (ISA/smbus)? ISA

  显示:

  To make the sensors modules behave correctly, add these lines to

  /etc/modules.conf:

  #----cut here----

  # I2C module options

  alias char-major-89 i2c-dev

  #----cut here----

  To load everything that is needed, add this to some /etc/rc* file:

  #----cut here----

  # I2C adapter drivers

  modprobe i2c-isa

  # I2C chip drivers

  modprobe w83627hf

  # sleep 2 # optional

  /usr/bin/sensors -s # recommended

  #----cut here----

  WARNING! If you have some things built into your kernel, the list above

  will contain too many modules. Skip the appropriate ones! You really should

  try these commands right now to make sure everything is working properly.

  Monitoring programs won't work until it's done.

  8:Do you want to generate /etc/sysconfig/lm_sensors? (YES/no): YES

  Copy prog/init/lm_sensors.init to /etc/rc.d/init.d/lm_sensors

  for initialization at boot time.

  完成。

  cat /etc/sysconfig/lm_sensors

  显示:

  MODULE_0=i2c-isa

  MODULE_1=w83627hf

  启动

  [root@linux etc]# /etc/rc.d/init.d/lm_sensors start

  Starting lm_sensors: [ OK ]

#p#副标题#e#

  测试:运行 sensors

  显示:

  w83627thf-isa-0290

  Adapter: ISA adapter

  VCore: +1.53 V (min = +1.93 V, max = +1.93 V)

  +12V: +5.59 V (min = +10.82 V, max = +13.19 V)

  +3.3V: +3.26 V (min = +3.14 V, max = +3.47 V)

  +5V: +5.01 V (min = +4.75 V, max = +5.25 V)

  -12V: -14.91 V (min = -10.80 V, max = -13.18 V)

  V5SB: +4.44 V (min = +4.76 V, max = +5.24 V)

  vbat: +3.23 V (min = +2.40 V, max = +3.60 V)

  fan1: 0 RPM (min = 225000 RPM, div = 2)

  CPU Fan: 3668 RPM (min = -1 RPM, div = 2)

  fan3: 0 RPM (min = 14062 RPM, div = 8)

  M/B Temp: +35?°C (high = +5?°C, hyst = +0?°C) sensor = thermistor

  CPU Temp: +42.0?°C (high = +100?°C, hyst = +95?°C) sensor = PII/Celeron diode

  temp3: +25.5?°C (high = +100?°C, hyst = +95?°C) sensor = thermistor

  ERROR: Can't get VID data!

  alarms: Chassis intrusion detection ALarm

  beep_enable:

  Sound alarm disabled

  eeprom-i2c-0-50

  Adapter: SMBus I801 adapter at 0500

  Memory type: DDR SDRAM DIMM

  Memory size (MB): 512

  运行: ntsysv

  设置lm_sensors 开机运行。

  接下来 设置与 cacti整合:

  编辑数据采集脚本

  Vi mrtg.sh

  #!/bin/sh

  cputemp=`sensors | grep “CPU Temp“ | awk '{print $3}' | cut -c 2-3`

  systemp=`sensors | grep temp3 | awk '{print $2}' | cut -c 2-3`

  uptime=`uptime | awk '{print $3 “ “ $4 “ “ $5}'`

  echo $cputemp

  echo $systemp

  echo $uptime

  echo linux226

  添加权限:chmod +x mrtg.sh

  采集结果如下:

  42

  26

  4:50, 2 users,

  linux226

  接下来改写档案

  WorkDir: /var/www/html/mrtg/temp/

  Language: big5

  Target[index]: `/var/www/html/mrtg/temp/mrtg.temp`

  MaxBytes[index]:60

  Options[index]: gauge, nopercent, growright

  YLegend[index]: Temp (度)

  ShortLegend[index]: 度

  LegendO[index]: 系统温度;

  LegendI[index]: CPU温度;

  Title[index]: Blue-Moon City 系统温度表

  PageTop[index]:

Blue-Moon City 主机温度表

  

  

  

系统: RedHat 9.0+Apache 2.0.40

  Mrtg添加:root#/usr/bin/mrtg /var/www/html/mrtg/temp/mrtg.cfg.temp

  然后将上面这条命令加入crontab 里定时运行。

  我在pc机测试没有问题。。IBM服务器测试没有成功,总是 sensors-detect 时候出错。

  经查询:IBM服务器不建议用lm_sensors 软件。

手机游戏排行榜